Personal tools
log in | join | help

Can you recommend a no-VOC paint or coating to use in a bathroom for water protection?

by LiveModern Webmaster last modified Jan 04, 2012 02:15 AM
Editorial Rating: 1 2 3 4 5
Average Rating: 1 2 3 4 5 ( 0 votes)
by last modified Jan 05, 2011

i am looking for a waterproof paint to use instead of using greenboard in the bath/shower room.



Bath-shower specifications that mitigate moisture issues such as rot and mold are extremely important to maintaining durability and indoor air quality.

I assume you are researching alternatives to using greenboard for your bathroom project, and I have a solution that will work.

First, the most important consideration for a bathroom project is to address ventilation. There are four conditions that are necessary for mold to grow:

  1. A mold spore
  2. Mold food
  3. Moisture
  4. Temperature

Of these conditions the easiest one to control is moisture. Ironically enough, the best method for controlling moisture is to ensure the space is ventilated to the exterior of your home. I recommend a bathroom fan with a humidity sensor to ensure it runs at proper intervals to abate moisture. I've had good luck with the Broan QTRE100S. Some fans do not maintain the listed cfm rating but this one has always passed inspection on my projects.

Now that ventilation has been addressed, let's review some specifications that provide durability and reduce the opportunity for mold growth.

Assuming your bathroom is gutted to the studs or is in the process of being constructed, you can select a cement wallboard to cover the walls and ceiling of the room. This can be considerably more expensive than drywall (greenboard or other). However, by choosing a cement board you eliminate the food source on the walls and ceiling. At a minimum, you should use cement board on the wet areas of the shower and tub surround. However, I have used cement board for the entire bath with great success. Some popular wall board brands are Durock, Hardiebacker, and Wonderboard.

If you choose to cover the walls and ceiling with a cement board, I would recommend using fiberglass tape and a pure (not modified) thin-set to smooth the joints. The shower and bath areas should be tiled over a water mitigation system such as the Schluter system.

At this point, you will be left with fewer finishing options for the remainder of the bathroom. The key to this specification addresses the heart of your question -- when you inquire about a no-VOC paint or coating. American Clay plaster is a natural coating of clay plaster that can be used in lieu of paint over your cement wallboard for the remaining areas of your bathroom (not to be used in the shower where it comes in direct contact with water).

It is a distinct look that provides an alternative to paint, can be used on the walls and ceiling, and can accommodate any look and style in your home. There are several benefits to this product; for more information, have a look at their website.

I recommend selecting an artisan installer -- you can find one from a list of trained professionals on their website. If you choose to apply the American Clay on your own, there may be a workshop in your area where you can learn the basic and advanced application techniques. At a minimum, you can set up a workspace and practice with American Clay in preparation for your project. The Loma product can be finished and refinished several times to achieve the desired results.

Lastly, the finishing touches to your new bath will require a non-wood crown molding such as Fypon or Azec. This molding can be painted to accommodate your American Clay color selection and will not rot, warp or provide a food source for mold.

Good luck on your project!




Website migration, maintenance and customization provided by Grafware.