Personal tools
log in | join | help

I have a 1923 home and want to install insulation in the attic, but there are no soffit vents. How can I retrofit them into my home?

by LiveModern Webmaster last modified Jan 04, 2012 02:14 AM
Editorial Rating: 1 2 3 4 5
Average Rating: 1 2 3 4 5 ( 0 votes)
by last modified Dec 04, 2010

I have a partially finished attic and want to retrofit insulation behind the knee wall and below the floors in the unused space. Unfortunately, there does not appear to be any soffit ventilation in this area. I am concerned about moisture buildup and related issues. Can I still install insulation in my attic space? How might I retrofit the soffit vents in after winter?



If your home was built in 1923, you probably do not mind completely replacing your soffit. With years and years of peeling paint, etc., it may be time to replace it. If that is the case, it is best to remove the soffit and install a new wood soffit with a continuous soffit vent.

If replacing the soffit is not an option, they do make round vents that are easier to install. Simply drill a hole and push in the round vent. Remember, if you are installing soffit vents, it is important to have a ridge vent as well.

In MN, I’m not sure I would wait until after winter to install the vents. Remember, the main reason for roof ventilation is to allow moisture to escape the attic. The main concern in your climate is hot air leaking through your ceiling and coming in contact with a cold roof deck – this could lead to condensation on the roof deck and, eventually, rot.

You mentioned you have a partially finished attic. Does that mean that you have clipped ceilings (sloped ceilings)? If you have this condition, it is important to be sure you maintain a ventilation gap between the insulation and the roof deck.

When insulating your knee walls and ceilings, be sure to maintain a continuous air barrier around your thermal envelope. Block under your knee walls between the floor joists. Back up your knee walls and seal all seams. Block the top of your knee wall. Air seal around all top plates and ceiling penetrations in your ceiling. Be sure all of this is in good shape prior to installing any insulation. Be sure to install baffles at the perimeter of the building to prevent wind wash from your new soffit vents.

For more information:

Read Erik Henry's Q&A "My soffits are covered with insulation. Do I remove all insulation over the soffits or push it back and put sleeves in?"




Website migration, maintenance and customization provided by Grafware.