Personal tools
log in | join | help
Sections

How to Manage Freezing Pipes

by LiveModern Webmaster last modified May 20, 2015 01:06 AM
Editorial Rating: 1 2 3 4 5
Average Rating: 1 2 3 4 5 ( 0 votes)
by GreenGirl last modified May 19, 2015

Frozen pipes tend to be bad; however burst pipes are substantially worse. Frozen water plumbing is a severe risk throughout cold winter weather. Whenever water... The post How to Manage Freezing Pipes appeared first on My Green Home Blog .




 

 

Frozen pipes tend to be bad; however burst pipes are substantially worse. Frozen water plumbing is a severe risk throughout cold winter weather. Whenever water freezes in a pipe it begins to expand and may apply pressure of over 2,000 lbs. per sq. inch. This pressure can be enough to break most any kind of pipe full of water which offers no room for the ice to expand. Once the pipe bursts it is going to spill several 100 gallons of water hourly, and that means $1000s of dollars of harm to your Toronto house. The ideal way to cope with freezing plumbing is to prevent it to begin with. However, if the unwanted really does happen, you will need to take action quick to reduce the destruction and expense of repairs.

Why Frozen Pipes Burst

Not every frozen pipe bursts. However when one does, it is usually due to water expanding as it freezes, adding significant pressure on inflexible plumbing pipes. This extra pressure may cause a little leak at a crack or joint on the length of pipe, releasing the entire flow of water in your home. Water destruction from a burst pipe is among the most typical property owner’s insurance claims, having a typical claim expense of around $5, 000.

Risky Locations

Plumbing is most vulnerable to freezing when situated:

  • Within an outdoors wall
  • Below a sink on an outdoors wall
  • Inside a crawlspace that is not heated

Prevention

When the temperature is likely to get cold:

  • Open any vanity doors and kitchen sink as well as any other potential problem area
  • When it comes to pipes that are on outdoors walls that could be a freeze issue, keep a little trickle of both hot and cold water flowing
  • Temporarily seal off any kind of crawl space vents which may be around the foundation
  • Keep your home warm

What To Do If Pipes Freeze

First you have to figure out which pipe is frozen. Switch the main watersupply off. This will keep water from rushing out when the pipe is finally thawed. Next, open the faucet taps in the home.If water is not flowing anywhere inside the home, a pipe close to the water-meter might be frozen. Feel the meter and also the surrounding uncovered pipes. If they feel cold, they are most likely frozen.If water flows in just a single section of the home, a pipe in an outdoors wall or uninsulated crawlspace is most likely frozen. Open bathroom and kitchen sink cabinets to permit warmer air from the home to warm-up the plumbing.

Once you have discovered the frozen pipe or plumbing, open up the impacted faucet completely, and open up other hot water taps in the home.  Once the water is running in the impacted pipe, close all the taps to a trickle. Don’t close the impacted tap until the pipe is totally thawed out and the water running freely.

If Pipes Burst

If a pipe does indeed burst, it will not take very long for the water to begin doing damage. If it starts to permeate walls and floors, you will require the assistance of a frozen pipes Toronto repair company to clean up, dry up as well as repair destruction. These companies can often handle the whole restoration process from dealing with your insurance carrier to drying out the damage, mitigating any kind of mold and handling repairs, so it is vital that you look for a company with a great reputation that you can trust to return your house to its condition before the water damage

The post How to Manage Freezing Pipes appeared first on My Green Home Blog.


 

 

 
 
 

Website migration, maintenance and customization provided by Grafware.