Personal tools
log in | join | help

Conference Room Table

by Universal Constructor last modified Sep 10, 2006 07:20 PM
Editorial Rating: 1 2 3 4 5
Average Rating: 1 2 3 4 5 ( 0 votes)



Conference Room Table

Posted by Universal Constructor at September 10. 2006


We are looking for a Conference Room Table. Roughly 4'-0 x 16'0 and able to seat 12 - 15.

Interested in doing a custom design, so we are happy to hear from fabricators - but also interested in purchasing a previously constructed custom piece. Interested in suggestions on new pieces available as well. It's for a Board Room and we are in the Austin area.

We will also be doing a Reception Desk.

Any suggestions appreciated.

Feel free to contact us off list,



Universal Joint Design Associates

Jonathan Chertok. Principal
Austin, Texas 1 512 407 9628

Development + Design + Construction

Re: Conference Room Table

Posted by David Reich at September 10. 2006
We did a conference table of nearly these same dimensions both modern and affordable using 1.5x1.5 square steel tubing for the frame and topped it with Delignit - a very high density birch plywood used often for wooden foundry patterns and doors in Europe. It is available in Canada from Delignit (Hans Baumann) and the fabrication was made at a local weld shop down the street. I can send a photo after I get to the office. Cheers.
Powered by Ploneboard




Website migration, maintenance and customization provided by Grafware.