Personal tools
log in | join | help

A woody radiator cover

by LiveModern Webmaster last modified Jan 04, 2012 03:20 AM
Editorial Rating: 1 2 3 4 5
Average Rating: 1 2 3 4 5 ( 0 votes)
by Jules ( last modified Apr 15, 2011



Materials: MOLGER storage stool, Shelf from As-Is section

Description: We are new to IKEA hacking.

Our curious little 1 year old was sure to burn herself on our dangerously hot radiators in our rental apartment. It is apparently NOT the landlord's job to make these safe. Thus, we set out to buy radiator covers, but I REFUSED to fork out hundreds of dollars (a piece) for two custom-made radiator covers for a RENTAL that we probably were going to leave at the end of our current lease. So this is what came of my stubborn frugality.

WE had a MOLGER stool, and I liked the look. I disassembled the stool. The slatted pieces that made the four sides of the stool were used as the front of the cover and allow for airflow. I then bought a couple pieces of wood to make the sides. I had to measure for the height that I wanted. This radiator cover doubles as a side table next to our couch. I checked the as-is section for a nice looking shelf for the top.

I put the slatted front together first. There are two shapes that come out of the MOLGER stool, one has two legs (U-shape) and one is just a square piece with slats. The piece without legs can be snugly fit in-between the legs to create one long slatted piece. I used tacks to secure the two pieces together. I needed to use a whole Molger M stool and a board from the hardware store in the middle to get the width we needed. Then we just hammered it together with skinny nails. Hammered the sides and top onto that. Hindsight, we should have put a layer of wood glue in-between pieces before nailing. It was an easy hack since a radiator cover is just a three-sided box with some sort of airflow. IT WORKS AMAZINGLY and is actually attractive. Probably someone with more patience or skill would use something more sophisticated than nails, but we are cheap and impatient.

Check the pictures for more details. You will notice the little plastic circles - these are the "bottoms" of what were the legs of the MOLGER stool. They come assembled with these little plastic skid stoppers. We just left 'em on.

~ Jojo, NYC



welcome to our open house

"I'm looking for housing that is affordable, and modern. I know there must be innovative, well-designed housing out there. I just can't seem to find it!" —Tracey R., from the Dwell discussion board


Website migration, maintenance and customization provided by Grafware.