the (mostly) finished bedroom!
Average Rating: ( 0 votes)
We’ve been making progress on one area of our house and surprise – it’s not the basement! Which can only mean one thing of course – yep, we were able to get another extension on our building permit. When I submitted the request I asked for a couple extra months and was excited to see that instead they gave us till October. A few days later, I realized it was October 2015. Guys, if we have not closed out this […]
We’ve been making progress on one area of our house and surprise – it’s not the basement! Which can only mean one thing of course – yep, we were able to get another extension on our building permit. When I submitted the request I asked for a couple extra months and was excited to see that instead they gave us till October. A few days later, I realized it was October 2015. Guys, if we have not closed out this permit by October 2015, someone please stage an intervention!
Anyway. The bedroom! You may recall this post from October when we first talked about our grand plans to re-remodel the space (we first tackled it in 2008) and then there was this post from November about choosing paint colors. Well, those paint swatches lived on the wall until about 3 weeks ago when we finally decided to commit to finishing the room.
I managed to snap a few crappy photos on my phone of the progress, but we didn’t feel it was super important to document the process. Spackle, sand, mask, paint…ho hum. (We also completed most of the work in a single weekend, so it was very go-go-go.)
There was no good reason for the delay other than it just wasn’t a necessity project. Kyle had already fabricated and installed the new headboard (which we uninstalled to paint as seen in the photo above) and we’d purchased the Flor tiles, decided on a paint color and bought the curtain track hardware for the wardrobe. Honestly, I think it was all the prep work that had us dragging our heels (that and the fact that Kyle and I both generally hate to paint).
We decided to leave the bed in the room and cover it (along with the wardrobe). This worked fine although painting between the wall and the wardrobe was a little challenging.
I should also mention that Kyle was awesome and did 95% of the work in here while I kept a curious toddler at bay and maintained my long-held role of “finder of things” and “extra pair of hands”. I painted Avery’s nursery while pregnant and could have kept up the tradition but underestimated how difficult it would be to paint during nap time and after bedtime only (especially when my bedtime seems to be about 30 minutes after Avery’s these days!).
One more progress photo before we get to the big reveal. We got a new (bigger) bed last year and had to get rid of our old headboard and frame. The new bed came with a simple metal frame so we opted to add a custom DIY maple plywood skirt around the three exposed sides (after painting and installing new carpet tiles). The joints are biscuited and glued at the corners and for now the assembly is just sitting on the floor. Eventually, we’ll attach it to the metal frame at the head.
Although most of the wood in our house is fir, we opted for maple in the bedroom to change things up and better match the existing IKEA PAX wardrobe.
A few accessories later and here we are! We still need new night stands – these are actually the discontinued Offi TV stands that we bought in 2008. We like them but had to turn them 90 degrees to fit which is a little awkward. Sadly, we haven’t been able to find any that we liked and could also afford (ahem, like these Blu Dot ones in “smoke”). There’s always the DIY option but again, too many other projects taking priority at the moment.
We’d also like to do something above the headboard. A single piece of art doesn’t seem like the right solution so we’ve been thinking of a narrow ledge for smaller art and objects (that can be changed out similar to what we have in the dining room) or maybe something more three-dimensional like a textile or sculptural piece that stands off the wall. I’m also ok with maybe doing nothing – I kinda like keeping the color on the bed and pulling the eye down towards that. I think it helps maintain the horizontality of the headboard.
We never really loved the curtain and track solution of the previous remodel (an IKEA tension wire and two brown curtains). We considered adding custom doors instead (either DIY or Semihandmade) but this would have been a more expensive solution and we would have had to move the fan/light to accommodate a door swing. After installing the ceiling-mounted KVARTAL track in Avery’s room, we decided to give it a go in our room. We were even willing to go with custom drapes (with a color! or a pattern!) but could never find something that we both liked. So in the end, back to IKEA. This time we used three panels instead of two which works so much better. (The middle unit mostly houses dirty laundry, jeans and other odds and ends so we were ok with this solution.) I think the lighter gray compliments the darkness of the walls while feeling airy and bringing some lightness to the space. I was worried that the linen material would be too transparent but that hasn’t been an issue at all. (Yeah, they could be hemmed a little bit. I washed them in hot water and was excited to see that they shrunk the perfect amount…until I ironed them. I’ll get to it.)
The paint color is Benjamin Moore’s “Ashland Slate”. It’s not quite as dark as Avery’s room (where we used BM’s “Baby Seal Black”) but we really like it. Kyle did two coats using BM’s Aura line and finished the whole room in just under a gallon.
The plywood skirt hides the bed frame and box springs but is still short enough that we’re not hitting our legs on it when we get in and out of bed. Although we’re all about using every inch of space in our house, the bed frame is low enough that we couldn’t get much usable space under there anyway (it had mostly become home to dog hair and errant tennis balls). This detail also allowed us to run the carpet tiles only partially under the bed (like a reverse area rug), saving us a few bucks.
The duvet is from IKEA (already owned) and I picked up the pillow and blanket from West Elm. We’re not big into accessorizing but I think these two additions really help tie everything together. The overall color palette doesn’t stray from the rest of our house, but what can we say – we like it! Besides, when you live in a small and fairly open house there’s a good argument for keeping things simple.
Another project we took on was building a custom valence to go over the window. Last year we swapped out the ugly brown curtain for a blackout roller shade from IKEA. It works great but having the shade face-mounted above the window (we have a translucent roller shade mounted within the window frame) always bothered us. So, Kyle built this valence out of maple trim boards (with a few coats of polyurethane for good measure). We also switched the positions of the roller shades so when the blackout shade was down there would be less light leakage at the sides.
The bedside sconces are from the Artemide Tolomeo line and the same ones we splurged on six years ago. Fortunately, the distance between the wall and shade was enough to accommodate the new headboard and we like how the two overlap each other.
Now, if you have a keen eye you may have noticed in that first photo that the new headboard covers the switches for the sconces. Fortunately, we found a solution in a Pico product line from Lutron. It’s a wireless remote that uses RF technology to operate the light. It has an “on” and “off” option and also a button that goes to a presetting of your choice. While at a lighting conference a while back, one of our friends dubbed this the “sexy time” button. Naturally, it’s the one button Avery always presses first.
Since we have about 5″-6″ of extra space between the wardrobe and the wall on each side, we decided to use the corner piece from the KVARTAL system and extend the track back into the recess. That way, if we wanted we could push the curtains back fully into the recessed niche. When they’re in the extended mode (as pictured above) there’s enough extra curtain that they can partially recess which helps to make the system feel more built in. For the money, I like the system a lot but it’s not perfect. Although we installed everything with as much precision as we could, the curtains don’t glide seamlessly over the seams between tracks.
Here’s a close up look of how the track is installed.
I regret not taking a photo of how the headboard is installed, but this shows how it does in fact stand off the wall by a few inches, creating a nice little shadow line and working with a room where the walls are not perfectly plumb and square. The detail is actually pretty simple – we made a French cleat out of tapered 2x’s with one attached to the back of the headboard and the other attached to the wall. The headboard cleat sits on top of the wall one (basically like this), ensuring a snug fit.
Like the nursery, we opted to leave the ceiling white. In this room, that meant repainting in “Super White” over the really bad yellow “white” paint that we used years ago.
A few more detail shots:
At the base of the IKEA wardrobe, Kyle installed a new piece of maple trim (glued in place to avoid exposed fasteners). This helps hide the edge of the carpet and the wardrobe toekicks that we installed backwards on all three units. (Until now, we had a piece of scrap masonite cut to size and glued to the raw MDF face.)
This room was the only space that had fir floors and during the first go-around we tried to salvage them as best we could. Over time, Bailey did a pretty good job gouging them out again and because they were never really great floors we decided to cover them with Flor carpet tiles (we used tiles from the “Suit Yourself” line in Pumice). We love it! The install was fairly easy – Kyle just removed the base shoe at the other three walls and then re-installed it a bit higher (before we repainted) to allow the tiles to slip underneath. (The shoe was originally installed because after we replaced all the lath and plaster with the thinner drywall, there was a small gap between the base trim and finish floor in some spots.)
Here are a few more detail shots of the valence. Kyle glued and biscuited the joints in his shop and then attached it to the wall using long screws that go through the top of the end pieces at an angle. We left the top open to simplify construction and keep it from becoming a dust shelf.
In the end, we didn’t really pick one of the three schemes that we originally blogged about but I think it’s a hybrid between a few of them. Although I’d been crushing on that West Elm chair, I finally decided it wasn’t all that practical (having one kept me from being able to open my drawers all the way) and that maybe, just maybe, not having one would force me to actually hang up my clothes. So far, so good!
All in all, we’re really happy with the space. It’s cozier and more peaceful than it was before (and way less frightening than when we moved in!). We’re finding that we spend more time as a family in there too – mostly on weekend mornings or in that hour before bedtime when everyone is winding down. Working our way through a stack of children’s books (a few of which have been read so many times that I had to hide them to save my sanity) is a nightly ritual and our bed has become a welcome alternative as both Avery and my belly get bigger and it’s been more of a challenge to fit on the glider in her room.
Most importantly though, the room is golden-approved. A light breeze through the window and Bailey will gladly nap for hours on end in there.